title early model of BLR, with illumination at 45 degree angle
//>>refer	tsuite	blr	Netzer, H., & Ferland, G.J. 1984, PASP 96, 593
//>>refercon	 Table 1
c
c commands controlling continuum =========
ionization parameter -1.92
power law -1 100 0.01
c this continuum is a beam coming in at 45 degrees 
illuminate 45 degrees
c
c commands for density & abundances =========
hden 9.5
abundances cameron
stop lyman optical 6
c
c commands controlling geometry  =========
c
c other commands for details     =========
init file "ism.ini"
constant gas pressure
iterate to convergence
c
c commands controlling output    =========
plot continuum
save performance "blr_nf84_45deg.per"
save overview "blr_nf84_45deg.ovr"
save convergence reason last "blr_nf84_45deg.cvr"
save dr "blr_nf84_45deg.dr"
save results last "blr_nf84_45deg.rlt"
save monitors last "blr_nf84_45deg.asr"
c
c commands giving the monitors    =========
// these are optically thick brems continua 
monitor pressure error < 0.002
//
// >>chng 04 dec 08, from 4.44 to 4.39, co-ion feedback, check converg
// >>chng 07 oct 27, from 4.39 to 4.43 add up lev opac to WNW FeII model
// >>chng 11 nov 16, from 4.43 to 4.535, adjust newmole monitors
monitor line "nFnu" 122.4m luminosity 4.535 error 0.1
//
// >>chng 04 dec 08, from 4.71 to 4.66, co-ion feedback, check converg
// >>chng 07 oct 27, from 4.66 to 4.70 add up lev opac to WNW FeII model
// >>chng 11 nov 16, from 4.7 to 4.805, adjust newmole monitors
monitor line "nFnu" 60.83m luminosity 4.805 error 0.1
//
// >>chng 04 dec 08, from 4.86 to 4.80, co-ion feedback, check converg
// >>chng 06 aug 09, from 4.80 to 4.84 Meudon 06, Bowen change
// >>chng 11 nov 16, from 4.84 to 4.958, adjust newmole monitors
monitor line "nFnu" 41.22m luminosity 4.958 error 0.1
//
// >>chng 04 dec 08, from 5.82 to 5.77, co-ion feedback, check converg
// >>chng 07 oct 22, from 5.77 to 5.71, resolve l-levels of h-like sequence
// >>chng 07 dec 14, from 5.71 to 5.75, RP update is seq
// >>chng 08 mar 17, from 5.75 to 5.55, r1844 - mostly iso PopOpc and rt_line_one_tauinc changes
// >>chng 09 oct 12, from 5.55 to 5.729, extend fine continuum to lower limit of code by default
// >>chng 11 nov 16, from 5.729 to 5.81, adjust newmole monitors
// >>chng 12 oct 09, from 5.81 to 5.736, fix CRD esc prob
monitor line "TOTL" 4861 luminosity 5.736 error 0.10
//
monitor line "TOTL" 1216  luminosity 7.217
// 
// >>chng 06 nov 24, from 6.436 to 6.457, turn on Badnell RR
// >>chng 06 nov 29, from 6.457 to 6.584, Badnell DR turned on
// >>chng 11 jul 12, from 6.584 to 6.548, enable fit to Badnell DR suppression
// >>chng 11 aug 05, from 6.548 to 6.526, make PRD redis func for h-like ions; LY_A func is now for H only
// >>chng 12 nov 01, from 6.526 to 6.463, Chianti experimental levels, revised Badnell DR suppression
// >>chng 13 feb 02, from 6.463 to 6.499, BUGFIX, largely undo r6703 
monitor line "TOTL" 1909  luminosity  6.499
//
// >>chng 06 aug 09, from 7.087 to 7.110 Meudon 06, Bowen change
// >>chng 06 nov 29, from 7.110 to 7.060, Badnell DR turned on
// >>chng 11 jul 12, from 7.06 to 7.084, enable fit to Badnell DR suppression
// >>chng 11 aug 05, from 7.084 to 7.053, make PRD redis func for h-like ions; LY_A func is now for H only
// >>chng 12 nov 01, from 7.053 to 7.091, Chianti experimental levels, revised Badnell DR suppression
monitor line "TOTL" 1549 luminosity  7.091 
// 
// >>chng 09 jun 28, from 1 to 6.819, check convergence of outward Hb
// >>chng 11 jul 12, from 6.819 to 6.842, enable fit to Badnell DR suppression
// >>chng 11 aug 05, from 6.842 to 6.806, make PRD redis func for h-like ions; LY_A func is now for H only
// >>chng 12 nov 01, from 6.806 to 6.844, Chianti experimental levels, revised Badnell DR suppression
monitor line luminosity "Inwd" 1549 6.844, 
// 
// >>chng 09 jun 28, from 1 to 5.535, check convergence of outward Hb
// >>chng 09 oct 12, from 5.535 to 5.729, extend fine continuum to lower limit of code by default
// >>chng 11 nov 16, from 5.729 to 5.81, adjust newmole monitors
// >>chng 12 oct 09, from 5.81 to 5.736, fix CRD esc prob
// >>chng 12 oct 17, from 5.736 to 5.771, Improved CRD esc p
monitor line luminosity "H  1" 4861 5.771, 
// 
// >>chng 09 jun 28, from 1 to 5.465, check convergence of outward Hb
// >>chng 09 oct 12, from 5.465 to 5.611, extend fine continuum to lower limit of code by default
// >>chng 11 nov 16, from 5.611 to 5.65, adjust newmole monitors
// >>chng 12 oct 09, from 5.65 to 5.61, fix CRD esc prob
// >>chng 12 oct 17, from 5.61 to 5.635, Improved CRD esc p
monitor line luminosity "Inwd" 4861 5.635, 
//
// >>chng 06 jul 25, from 6.059 to 5.999 HN update OIII collision data
// >>chng 06 aug 09, from 5.999 to 6.024 Meudon 06, Bowen change
// >>chng 09 feb 23, from 6.024 to 6.046, remove otslin, otscon dampers (PR #84, r2758)
// >>chng 11 jul 12, from 6.046 to 5.967, enable fit to Badnell DR suppression
// >>chng 11 aug 05, from 5.967 to 5.942, make PRD redis func for h-like ions; LY_A func is now for H only
// >>chng 13 jan 14, from 5.942 to 5.922, Pelec_esc improvements
// >>chng 13 feb 02, from 5.922 to 5.962, BUGFIX, largely undo r6703 
monitor line "TOTL" 1665  luminosity  5.962
//
// >>chng 04 dec 08, from 6.90 to 6.85, co-ion feedback, check converg
monitor line "TOTL" 2798  luminosity  6.85 err 0.1
//
// >>chng 04 dec 08, from 6.342 to 6.315, co-ion feedback, check converg
// >>chng 09 oct 12, from 6.315 to 6.291, extend fine continuum to lower limit of code by default
// >>chng 11 nov 16, from 6.291 to 6.323, adjust newmole monitors
monitor line "Fe 2" 6200  luminosity  6.323
// >>chng 08 apr 10, from 6.183 to 6.131, change default h-like levels, other minor changes
// >>chng 09 oct 12, from 6.131 to 6.087, extend fine continuum to lower limit of code by default
monitor line "Fe 2" 2400  luminosity  6.087 error 0.1
monitor element ionization Hydrogen 1 -0.011
//
// >>chng 04 dec 08, from -1.584 to -1.712, co-ion feedback, check converg
// >>chng 05 mar 25, from -1.712 to -1.63, renorm H pops in level solver
// >>chng 11 nov 16, from -1.63 to -1.574, adjust newmole monitors
monitor element ionization Hydrogen 2 -1.574 erro 0.1
//
monitor element ionization Helium   1 -0.007
//
// >>chng 04 dec 08, from -1.74 to -1.83, co-ion feedback, check converg
// >>chng 08 mar 22, from -1.83 to -2.21 bugfix r1879
// >>chng 09 feb 23, from -2.21 to -2.17, remove otslin, otscon dampers (PR #84, r2758)
// >>chng 11 nov 16, from -2.17 to -2.244, adjust newmole monitors
monitor element ionizaiton Helium   2 -2.244 error 0.1 
//
// >>chng 06 nov 29, from -2.505 to -2.482, Badnell DR turned on
monitor element ionizaiton Helium   3 -2.482
//
monitor element ionizaiton Carbon   2 -0.005
//
// >>chng 06 nov 29, from -2.477 to -2.380, Badnell DR turned on
// >>chng 12 nov 01, from -2.38 to -2.433, Chianti experimental levels, revised Badnell DR suppression
monitor element ionizaiton Carbon   3 -2.433 error 0.1
//
// >>chng 06 nov 29, from -2.665 to -2.725, Badnell DR turned on
// >>chng 11 jul 12, from -2.725 to -2.68, enable fit to Badnell DR suppression
monitor element ionizaiton Carbon   4 -2.68 error 0.1
//
monitor element ionizaiton Nitrogen 1 -0.051
//
// >>chng 04 dec 08, from -1.116 to -1.144, co-ion feedback, check converg
// >>chng 06 jul 07, from -1.144 to -1.174, Stancil N1 CT
// >>chng 11 nov 16, from -1.174 to -1.146, adjust newmole monitors
monitor element ionizaiton Nitrogen 2 -1.146
//
// >>chng 09 feb 23, from -2.54 to -2.498, remove otslin, otscon dampers (PR #84, r2758)
// >>chng 12 nov 01, from -2.498 to -2.572, Chianti experimental levels, revised Badnell DR suppression
monitor element ionizaiton Nitrogen 3 -2.572 error 0.1
//
// >>chng 06 nov 29, from -2.619 to -2.553, Badnell DR turned on
monitor element ionizaiton Nitrogen 4 -2.553 error 0.1
//
// >>chng 06 nov 29, from -3.056 to -3.113, Badnell DR turned on
// >>chng 11 jul 12, from -3.113 to -3.075, enable fit to Badnell DR suppression
// >>chng 12 nov 01, from -3.075 to -3.005, Chianti experimental levels, revised Badnell DR suppression
// >>chng 13 feb 02, from -3.005 to -3.057, BUGFIX, largely undo r6703 
monitor element ionizaiton Nitrogen 5 -3.057 error 0.1
//
monitor element ionizaiton Oxygen   1 -0.011
//
// >>chng 04 dec 08, from -1.80 to -1.97, co-ion feedback, check converg
// >>chng 05 mar 25, from -1.97 to -1.86, renorm H pops in level solver
// >>chng 11 nov 16, from -1.86 to -1.783, adjust newmole monitors
monitor element ionizaiton Oxygen   2 -1.783 error 0.15
// >>chng 10 mar 14, from -2.429 to -2.391, update As to NIST recommended values
// >>chng 11 jul 12, from -2.391 to -2.442, enable fit to Badnell DR suppression
monitor element ionizaiton Oxygen   3 -2.442 error 0.1
//
// >>chng 06 nov 29, from -2.793 to -2.706, Badnell DR turned on
// >>chng 11 jul 12, from -2.706 to -2.636, enable fit to Badnell DR suppression
// >>chng 12 nov 01, from -2.636 to -2.688, Chianti experimental levels, revised Badnell DR suppression
monitor element ionizaiton Oxygen   4 -2.688 error 0.1
//
// >>chng 11 jul 12, from -3.073 to -3.034, enable fit to Badnell DR suppression
monitor element ionizaiton Oxygen   5 -3.034 error 0.1
//
// >>chng 07 jan 20, from -3.591 to -3.636, e2 bug
// >>chng 11 jul 12, from -3.636 to -3.592, enable fit to Badnell DR suppression
// >>chng 12 jul 09, from -3.592 to -3.635, get rid of major discontinuities in 3body rates
// >>chng 12 nov 01, from -3.635 to -3.536, Chianti experimental levels, revised Badnell DR suppression
// >>chng 13 feb 02, from -3.536 to -3.603, BUGFIX, largely undo r6703 
monitor element ionizaiton Oxygen   6 -3.603 error 0.1
//
monitor element ionizaiton Iron     2 -0.005
//
// >>chng 04 dec 08, from -2.66 to -2.79, co-ion feedback, check converg
// >>chng 05 mar 25, from -2.79 to -2.71, renorm H pops in level solver
// >>chng 08 apr 10, from -2.71 to -2.66, change default h-like levels, other minor changes
// >>chng 08 apr 30, from -2.66 to -2.73 H, He topoff change
// >>chng 08 nov 13, from -2.73 to -3.011, fix Boltzmann factor in CT rates (r2455)
// >>chng 11 nov 16, from -3.011 to -2.933, adjust newmole monitors
monitor element ionizaiton Iron     3 -2.933 error 0.1
//
// >>chng 06 aug 09, from -2.638 to -2.586 Meudon 06, Bowen change
// >>chng 11 jul 12, from -2.586 to -2.658, enable fit to Badnell DR suppression
monitor element ionization Iron     4 -2.658 error 0.1
//
// >>chng 08 nov 13, from 3.797 to 3.775, fix Boltzmann factor in CT rates (r2455)
monitor element temperature Hydrogen 1  3.775
//
// >>chng 04 dec 08, from 3.997 to 4.044 co-ion feedback, check converg
// >>chng 05 mar 25, from 4.044 to 4.010, renorm H pops in level solver
// >>chng 08 nov 13, from 4.01 to 4.033, fix Boltzmann factor in CT rates (r2455)
// >>chng 11 nov 16, from 4.033 to 4.003, adjust newmole monitors
monitor element temperature Hydrogen 2  4.003
//
// >>chng 04 dec 08, from 3.82 to 3.78 co-ion feedback, check converg
monitor element temperature Helium   1  3.78 err 0.1
//
// >>chng 08 mar 22, from 3.962 to 4.12  bugfix r1879
monitor element temperature Helium   2  4.12 error 0.1
//
monitor element temperature Helium   3  4.272
//
// >>chng 04 dec 08, from 3.812 to 3.777 co-ion feedback, check converg
monitor element temperature Oxygen   1  3.777
//
// >>chng 04 dec 08, from 3.870 to 3.892 co-ion feedback, check converg
// >>chng 06 feb 03, from 3.892 to 3.872, guess dr to Badnell mean
monitor element temperature Oxygen   2  3.872
//
monitor element temperature Oxygen   3  4.228
monitor element temperature Oxygen   4  4.270
monitor element temperature Oxygen   5  4.277
//
monitor element temperature Oxygen   6  4.279
//
monitor element temperature Oxygen   7  4.280
// 
// >>chng 05 mar 25, from 3.847 to 3.824, renorm H pops in level solver
// >>chng 07 oct 26, from 3.824 to 3.843, very close to botch after recent changes
// >>chng 11 jul 12, from 3.843 to 3.814, enable fit to Badnell DR suppression
monitor element temperature Iron     1  3.814
//
// >>chng 04 dec 08, from 3.814 to 3.779 co-ion feedback, check converg
monitor element temperature Iron     2  3.779
//
// >>chng 04 dec 08, from 3.957 to 3.977 co-ion feedback, check converg
// >>chng 05 mar 25, from 3.977 to 3.951, renorm H pops in level solver
// >>chng 08 nov 13, from 3.951 to 4.024, fix Boltzmann factor in CT rates (r2455)
// >>chng 11 nov 16, from 4.024 to 3.995, adjust newmole monitors
monitor element temperature Iron     3  3.995
//
// >>chng 07 oct 26, from 4.207 to 4.227, very close to botch after recent changes
monitor element temperature Iron     4  4.227
//
// >>chng 06 nov 29, from 4.237 to 4.258, Badnell DR turned on
monitor element temperature Iron     5  4.258
//
// >>chng 07 jan 20, from 4.256 to 4.277, e2 bug
monitor element temperature Iron     6  4.277
//
monitor element temperature Iron     7  4.272
monitor element temperature Iron     8  4.276
//
// >>chng 08 dec 08, from 400 to 352, upper limit -> equals (r2515)
// >>chng 09 jan 16, from 352 to 354, average of 10 runs
// >>chng 09 mar 27, from 354 to 359 improve rigor esc prob & pop defns
// >>chng 11 nov 16, from 359 to 292, adjust newmole monitors
// >>chng 12 mar 07, from 292 to 359, renorm to r5961 results
monitor nzone 359 
// 
// >>chng 05 dec 22, from 18 to 20 (16.9) drift up
// >>chng 08 dec 08, from 20 to 18.62, upper limit -> equals (r2515)
// >>chng 08 dec 13, from 18.62 to 40.25, merging newsolvers branch
// >>chng 09 jan 16, from 40.25 to 39.65 (error 0.04), average of 10 runs
// >>chng 09 nov 03, from 39.65 to 41.07 (error 0.04), average of 10 runs
// >>chng 12 mar 07, from 41.07 to 29.83, renorm to r5961 results
monitor itrzn 29.83
//
c blr_nf84_45deg.in
c class blr 
c ========================================
c 

This is an example of a "conventional" BLR calculation. The parameters are
similar to those of Table 1 of Netzer and Ferland (1984).  Notice that the
ratio of Lyalpha to Hbeta ratio is much larger than observed.

>>refer	blr	model	Netzer, H., & Ferland, G. J. 1984, PASP, 96, 593